View all newsletters
Have the short, sharp Spear's newsletter delivered to your inbox each week
  1. Partner Content
June 14, 2022updated 16 Jun 2022 3:44pm

The Functional Elegance Behind the McLaren Artura

By Sponsored Content

From our partners: To create a plug-in hybrid, McLaren defined its engineering then followed with design.

From the powertrain to the monocoque, many major parts of the McLaren Artura’s design are completely new. This meant that creating the accompanying systems, like the aerodynamics and aerothermal, required the latest construction methods.

McLaren chose superformed aluminum – where metal is shaped at over 500°C – as opposed to a more conventional panel stamping to achieve supercar proportions and impressive performance figures. Yes, it takes a powerful engine to go from 0-60 mph in three seconds, but it also requires precise design.

Reducing the quantity of panels by 85% not only aided in McLaren’s constant fixation with lightness, but began to create the most recent design language for the brand. Take, for example, the rear clamshell; minimal body shutlines and panel joints conjure a sculpted smoothness that allows the eye to perceive the entire back of Artura in one glance. It alludes to words like straightforward and stunning all at once as the body panels and dihedral doors appear as if they are shrink-wrapped with definition.

Image of a McLaren on the track

Book your exclusive driving experience here

To harness airflow to maximum effect, features such as new hidden door inlet ducts and rear buttresses channel air over, under and through the body. The rear spoiler and diffuser generate 50kg of downforce for ultimate stability. Guiding not only clean air through the vehicle, but cooling air for the eHVAC system and the low temperature radiators, McLaren’s aerothermal technologies push heat away the powertrain chimney and feed the rear spoiler.

The Notion of Necessary

cockpit image of a mclaren
The cockpit was designed by McLaren’s ‘eyes on the road, hands on the wheel’ approach / ©McLaren

Mclaren Artura’s design redefines the notion of “necessary”. Edited down so that every element fulfills a job while remaining sculpturally interesting, ruminate on words like airflow and downforce. They are often used but seldom strictly defined.

Content from our partners
Abu Dhabi Finance Week in the 'Capital of Capital'
Experience Seekers: The Future of Luxury Travel
How Hamblin Family Law is exploring a groundbreaking pricing model

What one could perceive as the smallest detail – the vented louvers on the front fenders for example – are precisely molded to reduce pressure to the wheel arches and push soiled air away from the side intakes. Simultaneously, the sculpted door channels guide clean air into those intakes. Inherently, this enhances driver and passenger comfort but is oft overlooked.

The interior follows a similar process of extreme rationality. Built around and for the driver, the cockpit was designed by McLaren’s ‘eyes on the road, hands on the wheel’ approach. They can be adjusted and fine-tuned while the driver’s hands remain on the steering wheel.

For example: driving mode selection – which retains separate powertrain and handling controls – has been moved to the instrument binnacle, which is in turn mounted to the steering column and adjusts with the steering wheel to further enhance driving ergonomics. Consequently, the steering wheel is kept clear of unnecessary switches.

McLaren engine

Designed in tandem

Although performance is principal, McLaren Artura’s design also considers comfort. Building on lessons learned during the development of the GT and Speedtail, McLaren engineers evaluated sound levels in an entirely new light.

Unlike any other McLaren, Artura will run for part of the time in silent mode, which means more complex challenges than a vehicle powered only by an internal combustion engine.

Developing interior and exterior in tandem meant that, for example, the engine chain drive being located at the rear of the all-new V6 would automatically reduce noise intrusion into the cabin.

The monocoque itself plays a key role in refinement, not only through its structural consistency and stiffness but also in the way it is integrated; in the McLaren Senna, for example, the carbon fiber chassis was used to amplify the low-frequency sounds into the cabin, while in the Artura specific work was undertaken to actively eliminate this effect in order to maximize refinement during everyday use.

Alcantara or Nappa leather appears on almost every surface in the interior, with the Extended Nappa Leather specification covering the whole cabin, including the doors, rear parcel shelf, central tunnel and lower dashboard.

Always one to reduce weight, McLaren worked with longtime collaborator Bridge of Weir to create a leather that is the same thickness and feel as the regular material. One key difference: aerating the back.

A subtle but thoughtful change, and a perfect example of how McLaren reexamined and optimized every item that enters its vehicles.

Click here to book your McLaren Artura test drive today

Topics in this article : ,
Select and enter your email address The short, sharp email newsletter from Spear’s
  • Business owner/co-owner
  • CEO
  • COO
  • CFO
  • CTO
  • Chairperson
  • Non-Exec Director
  • Other C-Suite
  • Managing Director
  • President/Partner
  • Senior Executive/SVP or Corporate VP or equivalent
  • Director or equivalent
  • Group or Senior Manager
  • Head of Department/Function
  • Manager
  • Non-manager
  • Retired
  • Other
Visit our privacy policy for more information about our services, how Progressive Media Investments may use, process and share your personal data, including information on your rights in respect of your personal data and how you can unsubscribe from future marketing communications.
Thank you

Thanks for subscribing.

Websites in our network